When choosing a workshop in an auto industrial estate, first send photos of the damage via WhatsApp to get an initial estimate, compare quotes from at least two workshops for the same scope of work, and only then set off. We are located in Kepez Akdeniz Sanayi Sitesi industrial estate at Şafak Mah. 5040. Sk. Sanayi 28/A Blok No 16, and we are open Monday–Saturday from 08:30 to 19:00.
An auto industrial estate is an environment where hundreds of workshops operate side by side, streets look similar, and most business is driven by word of mouth. Understanding how the industrial estate works will save you time and money when finding the right workshop. This article covers the practical side: what to do before going, how to compare quotes, and what to remove when leaving your car. For paint quality, see our guide on choosing an auto painter, and for structural repairs, see choosing a body shop.
How does an auto industrial estate work?
An industrial estate consists of independent workshops gathered in the same area; each workshop has its own craftsmen, pricing, and working hours. Within the estate, bodywork, paint, mechanical, electrical, and spare parts businesses are usually located close to one another.
This setup has two advantages: referrals between businesses are quick when looking for parts or other expertise, and prices are competitive and easy to compare. The disadvantage is that streets and blocks look alike, along with traffic and parking issues during peak hours. There are multiple industrial zones in Antalya; we operate in Akdeniz Sanayi Sitesi in Kepez. For address and directions, you can check our Antalya auto industrial estate page.
What should you do before going to the industrial estate?
The most efficient preparation is to send photos of the damage in advance. When you get an initial estimate via photos, you can see a rough budget and timeframe before heading out, making it much easier to choose who to work with.
- Take photosPhotograph the damage from four angles and up close in daylight. Showing the license plate is not required, but vehicle model and year information is necessary.
- Write the messageSend the photos with a brief message such as "vehicle model, year, location of damage, and paint code if known."
- Select two or three workshopsVerify the workshop name and address on the map; block and street numbers can easily be confused in an industrial estate.
- Ask about working hoursWe are open Monday–Saturday 08:30–19:00 and closed on Sunday. Hours may differ at other workshops.
- Determine the vehicle's drivabilityIf the vehicle is drivable, you can bring it yourself; if not, a tow truck is required. Decide on towing before setting off.
How to get an initial estimate with photos via WhatsApp?
An initial estimate via WhatsApp gives you an approximate range based on the damage shown in photos; the final price is determined once the car is inspected in person. We always reply to WhatsApp messages, provide initial pricing and timeframe estimates, and vehicle inspection at our workshop is free.
To receive a clearer answer, send photos in this order: the vehicle as a whole, a close-up of the damaged panel, a side view of the damage, and if applicable, an angled lighting shot showing scratch or dent depth. Add a single sentence explaining what you need: such as "Scratch on the door, spot repair or full panel painting?"
Tip: Send the same message to several workshops; response speed, tone, and level of detail give you a good idea of what working with the workshop will be like.
How to compare quotes?
The only accurate way to compare quotes is to ask for the exact same scope of work using the same terms. While one shop quotes "door painting 4,000 TL", another might mean a different scope that includes body filler, primer, clear coat, and warranty.
| Service | Price range (our shop) | Duration | Questions to ask about the quote |
|---|---|---|---|
| Door painting | 3,500–6,000 TL | 1–2 days | Are body filler, primer, and clear coat included? |
| Fender painting | 4,000–7,000 TL | 1–2 days | Will color blending be done? |
| Hood / roof | 5,000–10,000 TL | 1–2 days | Number of clear coat layers on large surfaces? |
| Bumper | 2,500–5,000 TL | 1–2 days | Are repair and painting listed separately? |
| Full respray | 25,000–80,000 TL | 5–10 days | Are door jambs and interior sections included? |
Beyond price, the answers to these three questions should also match: what surface preparation will be done, which paint system will be used, and how does the warranty work. We use PPG and Standox paints, a dust-free oven-baking spray booth, and offer guaranteed workmanship. For an overall pricing framework, see our car painting prices 2026 article.
Appointment or walk-in?
An appointment is not required for an inspection; however, calling or messaging beforehand is recommended to avoid waiting during peak hours. Workload varies by time of day, day of the month, and season.
Weekday mornings and early afternoons are generally quieter than Saturdays. Call to ask for the best time. For painting jobs, after leaving the vehicle at inspection, the schedule is planned according to the damage; panel painting usually takes 1–2 days, and a full respray takes 5–10 days.
What should stay in the car and what should be removed when dropping it off?
Remove valuables and personal items from the vehicle; if leaving documents, leave only what is necessary. In a workshop, vehicles move between booths and workstations, and doors are frequently opened and closed.
| Remove from the vehicle | Leave in the vehicle |
|---|---|
| Phone, wallet, cards, cash, sunglasses/glasses, valuables | Registration and insurance documents (if needed; a copy is sufficient) |
| Personal belongings in the trunk, laptop, bags | Spare tire and tool kit (confirm count at drop-off) |
| Parking cards, garage and gate remotes | Spare key only if required |
| Child seat and extra accessories | None |
When dropping off the car, take photos of all four sides and the damaged area; also record the odometer reading. In addition, request confirmation of the agreed work in writing or via WhatsApp. Upon pickup, these photos along with our vehicle handover checklist will be very useful.
Working hours and directions
Our workshop is open Monday–Saturday from 08:30 to 19:00. Our address is Kepez Akdeniz Sanayi Sitesi, Şafak Mahallesi 5040. Sokak, Sanayi 28/A Blok No 16.
You can search for "Nett Oto Boya ve Hasar Onarım" on map apps to get directions. Pay attention to block and street numbers inside the industrial estate; navigation can sometimes lead to a parallel street. Calling before you arrive helps us guide you: 0538 840 42 64. For district route details, you can view our Kepez car painting, Lara car painting, and Muratpaşa car painting pages.
Mistakes to avoid in the industrial estate
- Leaving the vehicle without photos: It becomes difficult to prove at what stage any damage occurred later on.
- Relying solely on "friend" recommendations: A recommendation is a good starting point, but get a dedicated quote for your specific damage.
- Settling for a verbal quote: Confirm the scope in writing or via message.
- Getting a price from just one workshop: Two or three quotes show the reasonable market range.
- Not asking about parts and additional procedures: Extra work not discussed upfront can turn into an unexpected bill at delivery.
Send photos of the damage, and we will provide an initial estimate and timeframe. We will also send directions and working hours before you arrive.
When should you go to the industrial estate?
- If the photo estimate fits your budget and you want to see the workshop in person.
- If you want to know whether the damage is only cosmetic or deeper; inspection is free of charge.
- If both bodywork and paint are required after an accident; check our accident repair bodywork and painting page.
- If the repair will be done through insurance or collision coverage; read our insurance damage claim process article.
Traffic and the best time to visit the industrial estate
The industrial estate is busier in early mornings and after lunch; during peak hours, finding parking and talking at length with the technician becomes harder. Choosing a quieter time ensures more attention is given to your car during inspection.
Late mornings on weekdays or quieter afternoon slots are generally ideal for an inspection; however, these hours vary by workshop and season, so checking in advance is wise. In summer, leaving a car in the Antalya midday sun for extended periods is also undesirable; visit in the morning if possible.
Once you drop off the vehicle, you can ask for progress updates via WhatsApp. We always respond to messages; what matters most is being told transparently if repairs will take longer. When working with a workshop in an industrial estate, this level of communication is just as decisive as the price.
How trust is built in an auto industrial estate
Trust in an industrial estate comes from transparent pricing, written scope, responsive communication, and visible workmanship. A workshop being able to show completed work, answering your questions patiently, and keeping waiting vehicles organized are all good signs.
Before going and when you arrive, inspect a car ready for handover at the workshop; examine panel gaps, paint finish, and cleanliness. We detailed what to check upon vehicle handover in our checklist. Base your decision not on a single visit, but on the overall impression from both your messages and the visit to the shop.
Quick summary for first-time visitors to the industrial estate
If you are visiting an industrial estate for the first time, keep three things in mind: send photos first, verify the address on the map, and discuss the scope before dropping off the car. These three steps minimize the risk of ending up at the wrong shop and making unnecessary trips.
Do not hesitate to ask questions during the inspection: ask which areas the damage affects, what procedures will be carried out, how long it will take, and what the warranty covers. After receiving a quote, you can visit another workshop before making your decision; since the inspection is free, there is no obligation.
Frequently asked questions
Can I go to the industrial estate without an appointment?
Yes, an appointment is not required for an inspection. To avoid waiting depending on how busy we are, we recommend calling or messaging us on WhatsApp beforehand.
Are you open on weekends?
We are open on Saturday (08:30–19:00). We are closed on Sunday.
What is the first thing I should do when choosing a workshop in the auto industrial estate?
Take photos of the damage, send them via WhatsApp to get an initial estimate, and compare quotes from at least two workshops for the exact same scope of work. Only then set off.
How does getting an initial estimate with photos via WhatsApp work?
You send photos of the damage, and we provide an approximate price range and timeframe. The final price is confirmed during the inspection after examining the vehicle in person.
Will I be charged for the inspection?
Inspection is free of charge at our workshop. Giving a definitive price without seeing the damage or charging for an inspection are red flags to watch out for when comparing shops.
What should I remove from my vehicle before dropping it off?
Remove your phone, wallet, cash, cards, and valuables. Empty personal belongings from the trunk as well. Take photos of the vehicle and note down the mileage.
What should I do if the vehicle is not drivable?
You will need a tow truck. Arrange the tow truck before setting off and inform the workshop of your estimated arrival time.
How long does the repair take?
Panel painting usually takes 1–2 days, and a full respray takes 5–10 days. Minor damage takes 1–3 days, medium damage 5–7 days, and severe damage 2–4 weeks. The exact timeframe is given during the inspection.